Extron electronic Stereo Receiver MTP 1500RL 15HD A SEQ User Manual |
MTP 1500RL 15HD A SEQ • Setup Guide
This guide provides basic instructions for an experienced installer to set up and operate the Extron MTP 1500RL
15HD A SEQ twisted pair receiver.
RED
LEVEL
PEAKING
SELECT
GREEN
BLUE
DELAY
MIN/MAX
ADJUST
MTP 1500RL Series
RGB
INPUT
MTP
BUFFERED OUTPUT
MTP
OUTPUT
POWER
12V
1.0A MAX
AUDIO
R
MONO
L
ON
MTP 1500RL 15HD A SEQ
Installation and Setup
Step 1 — Mounting
Turn off or disconnect all equipment power sources. Mount the MTP 1500RL 15HD A SEQ receiver as required.
Step 2 — Connect Input
Connect the RJ-45 cable from an MTP transmitter to the Input port on the MTP 1500RL 15HD A SEQ receiver.
Terminate the cable as shown below right, using the same standard (A or B) at both ends.
Pin T568A Wire
Color
T568B Wire
Color
RJ-45 Connector
1
2
3
4
5
6
7
8
White-green
Green
White-orange
Orange
Pins:
12345678
White-orange
Blue
White-green
Blue
White-blue
Orange
White-blue
Green
White-brown
Brown
White-brown
Brown
Insert Twisted
Pair Wires
NOTE:
The transmitter and receiver are designed for and perform best with Extron Enhanced Skew-Free AV cable terminated in accordance
with the TIA/EIA T568A standard. CAT 5 cables are acceptable but less preferable. Using preterminated and tested cables is also
recommend, Cables terminated on site should be tested before use to ensure that they comply with Category 5 specifications.
Step 3 — Connect Outputs
Attach the applicable output cables (video, audio, and buffered output).
A. High resolution video output — Connect a display device to the 15-pin HD connector (RGB).
B. Audio connector — Connect an audio device to the 5-pole captive screw connector for mono audio output
Mono output 1+
Mono output 1-
Sleeve(s)
Mono output 2+
Mono output 2-
Mono output 1
NO GROUND.
Sleeve(s)
Mono output 2
NO GROUND.
Do not tin the wires!
Balanced Output
Unbalanced Output
CAUTION
For unbalanced audio, connect the sleeve(s) to the ground contact.
DO NOT connect the sleeves to the negative (-) contacts.
C. Buffered output — Connect up to 5 daisy-chained MTP receivers to this RJ-45 connector.
|
Echo Chainsaw CS 400F User Manual
Ei Electronics Smoke Alarm Ei 176 User Manual
Escient MP3 Player DVDM 300 User Manual
Eton Weather Radio FRX2 User Manual
Excalibur electronic Games K452 CS User Manual
Extron electronic Projector SYSTEM 8 10 PLUS User Manual
Garmin Automobile Accessories 190 00307 00 User Manual
Generac Portable Generator 004373 1 004626 0 User Manual
GE Refrigerator 197D3354P013 User Manual
GE Ventilation Hood JN322 JN334 JN335 JN634 JN635 JV322 JV324 JV332 JV334 JV335 JV624 JV634 JV635 User Manual