Sangean Electronics Car Satellite Radio System RCR 5 User Guide

RCR-5  
GB  
Version 1  
 
Important safety instructions  
1. Read and understand all safety and operating instructions  
before the radio is operated.  
2. Retain instruction: The safety and operating instructions should  
be retained for future reference.  
3. Heed warnings. All warnings on the appliance and operating  
instructions should be followed.  
4. Follow all operations and use instructions.  
5. Water and moisture: The appliance should not be used  
near water. Do not use near a bathtub, washbowl, laundry tub,  
kitchen sink, wet basement, swimming pool, etc.  
6. Unplug the radio from the AC power outlet before cleaning.  
Use only a damp cloth for cleaning the exterior of the radio.  
7. Do not place the radio on an unstable cart, stand, bracket or  
table. The radio may fall, causing serious personal injury and  
damage to the radio.  
8. Ventilation: This radio should be situated so that its location or  
position does not interfere with its proper ventilation.  
For example, the radio should not be used on a bed, sofa, rug or  
other soft surfaces that may block the ventilation openings.  
It should not be placed in a built-in situation like a cabinet that  
may reduce air flow through the ventilation openings.  
9. Power sources: The radio should be operated only from the type  
of power source indicated on the marking label. If you are not  
sure of the type of power supply to your home, consult your  
radio dealer or power company.  
1
 
10. Power cords: The power cord should be positioned so it is not  
walked on, pinched, or items placed on top of it. Pay particular  
attention to cords at plugs, convenience receptacles, and the  
point where they exit from the unit. Unplug the power cord by  
gripping the power plug, not the cord. Operate the radio using  
only the current type of power source indicated. If you are not  
sure of the type of power supply to your home, consult your  
dealer or local power company.  
11. Do not overload wall outlets or extension cords. This can result  
in a risk of fire or electrical shock. Never insert objects of any  
kind into the radio through opening. The objects may touch  
dangerous voltage points or short out parts. This could cause  
a fire or electrical shock.  
12. If the radio is left attended and unused for long periods of time,  
unplug it form the wall outlet. This will prevent damage caused  
by lightning or power line surges.  
13. If the radio is left unattended and unused for a long period  
of time, remove the batteries. The batteries may leak and  
damage furniture of your radio.  
14. Do not attempt to service the receiver yourself. Removing the  
cover may expose you to dangerous voltage, and will void the  
warranty. Refer all servicing to authorized service personnel.  
15. Object and Liquid Entry-Never push objects of any kind into this  
radio through opening as they may touch dangerous voltage  
points or short-out parts that could result in a fire or electric  
shock. Never spill liquid of any kind of product.  
GB  
16. The appliance should be serviced by qualified service  
personnel when:  
A. The power supply cord or the plug has been damaged.  
B. Objects have fallen or liquid had been spilled into the radio.  
C. The radio has been exposed to rain or water.  
D. The radio does not appear to operate normally or exhibits a  
marked change in performance.  
E. The radio has been dropped, or the enclosure damaged.  
2
 
3
 
Controls  
1
2
3
4
5
Power on/off and Sleep Timer button  
BAND button  
NAP TIMER button  
STATION PRESETS  
TUNING Up/Down and Snooze  
TIME SET/DISPLAY button  
Alarm 2 button  
6
7
8
9
Alarm 1 button  
LCD Display  
10  
11  
12  
13  
14  
15  
16  
Volume Control knob  
Headphones socket  
AUX in  
Display Backlight Adjustment button  
Logo and specification mark  
FM antenna  
Power socket  
LCD display  
A
Radio band and a.m./p.m. display  
Hour and minute digits  
Second digits  
B
C
D
GB  
Alarm indicators  
Sleep timer  
E
F
Nap timer  
G
H
Week day  
Clock set  
4
 
Operation  
Clock Setting (date and time)  
Clock time has to be set before alarm setting.  
1. Press and hold the TIME SET button for more than 2 seconds,  
the display will show  
, and flash the year digits.  
2. Press TUNING Up/Down button to set the year.  
3. Press the TIME SET button, then use the same way to set  
the date.  
* press and hold the TUNING Up/Down button for fast-forward  
or fast-backward.  
4. Press the TIME SET button to set the hour with TUNING  
Up/Down button. Same way (press TIME SET then TUNING  
Up/Down ) to the minute. The day of week is automatically set.  
5. After the minute is set, then press the TIME SET button to  
complete the setting.  
While setting, the setting will be cancelled after 30 seconds  
without pressing any buttons.  
After the time is under setting, the setting won’t be cancelled  
even you don’t press any button for more than 30 seconds.  
You need to press the TIME SET button to complete the  
setting, and the second digit will be set to 0 at the moment  
when you press the TIME SET button.  
5
 
Radio operation  
Turn on the radio with the POWER button.  
Tune into desired stations  
Station selection  
1. Press the TUNING up/down button, to tune into the frequency  
of your desired stations  
2. Scanning tuning- Press and hold the TUNING up/down button for  
more than 0.5 seconds and release, the radio will search for the  
next station.  
STATION PRESETS  
1. Tune into the stations that you would like to store.  
2. Select a STATION PRESET button (1-5) and press it for  
more than 2 seconds until a beep sounds and the station is  
now stored.  
Note:  
When you store a new station in a preset, the station previously  
stored will be automatically erased.  
GB  
Recall the station memories  
To recall the station memories, simply press the BAND button  
to select the required bands and press the required STATION  
PRESET (1-5 ).  
6
 
Volume  
Turn the VOLUME knob to adjust the volume.  
Alarm Clock  
Alarm setting can be done while the power is during ON or  
OFF position.  
The alarm clock is equipped with two alarm systems which can be  
operated independently of each other.  
There are 2 kinds of alarm sounding, sound- buzzer and radio  
1. Select alarm system 1 or 2 by pressing the ALARM 1 or  
ALARM 2 button. Display will show the selected alarm  
system symbol, or .  
2. Before the display goes back to the clock, press TIME SET  
button for 2 second until you hear the beep. The display will blink  
the hour. Press the TUNING up/down button to set the hour.  
3. Press the TIME SET button and the display will flash the minute  
digit. Press the TUNING up/down button to set the minute.  
4. Press the TIME SET button and then press the TUNING  
up/down button to select if the alarm should work on daily,  
weekday (Monday to Friday), weekend (Saturday and Sunday),  
or only once. 4 options.  
7
 
5. Press the TIME SET button and then press the TUNING  
up/down button to select the alarm sound. There are  
RADIO ALARM  
, and BUZZER ALARM  
, 2 options.  
a. If the BUZZER ALARM is selected – press the TIME SET  
button to complete the setting.  
b. If the RADIO ALARM is selected – press the TIME SET  
button and then select the radio band and the frequency to  
choose the alarm radio station. Then press the TIME SET  
button to complete the setting.  
c. The setting will automatically complete the setting after  
30 seconds without any button pressed. But when the  
ALARM RADIO is under setting, it will not complete  
automatically until the TIME SET of POWER button  
is pressed.  
6. After the alarm is set, the alarm status will be shown for  
6 seconds then will go back to the clock.  
* HWS(Human Wake System): In buzzer alarm mode, the buzzer  
sound will increase in volume for 1 minute, then followed by  
1 minute silence, then repeat the cycle for 1 hour.  
GB  
8
 
Deactivate alarm setting  
Press the ALARM 1 or ALARM 2 button for 2 seconds until you  
hear the beep. The alarm symbol will show . And the alarm will be  
deactivated. To reactivate the alarm, press the ALARM 1 or  
ALARM 2 button for 2 seconds until you hear the beep.  
Stop the alarm signal  
To stop the alarm sounding , press the POWER button.  
Snooze  
To interrupt the sounding alarm ( radio or beep tone), press the  
SNOOZE button. The alarm stops and begins again with interval  
of 5 minutes. The alarm will continue for an hour whatever  
being interrupted.  
Nap timer  
With the NAP button, you can select the period for the short term  
alarm in 10 minutes steps from 10-120 minutes.  
The Nap timer starts when you release the key. NAP will appear on  
display. The alarm signal sounds after the period of time which you  
have set.  
If you wish to turn off the Nap timer before the time is up,  
simply adjust the number of minutes by pressing NAP button to  
OFF and release. NAP will disappear from display.  
9
 
SLEEP timer – auto shut off  
Continuously pressing the POWER button will activate the sleep  
function, the radio will switch off automatically in 15, 30, 60, 90,  
or 120 minutes.  
The Sleep control begins when you release the POWER button and  
display will appear the minutes.  
After the minutes which selected, the radio turns itself off  
automatically  
.
If you wish to turn off the radio beforehand, press POWER button.  
And the SLEEP timer symbol will disappear.  
Calendar Display  
Press the TIME SET/DISPLAY button to see the year, and press  
it again to see the date. The display will go back to the clock in  
3 seconds.  
GB  
10  
 
24/12 hours format, AM, FM frequency  
step setting  
1. Press and hold the BAND button for 6 second until you hear  
the beep, and the display will flash the current 24/12 hr format.  
Press the TUNING up/down button to select 24 hr (military hr)  
or 12 hr format.  
* After the 24/12 hour format setting, if you don’t wish to make  
any change on tuning frequency step, please press the BAND  
button for 2 times (you will hear the beep for each time),  
then the display will go back to the clock. If you wish to  
change the tuning frequency step, follow the next steps:  
2. Press the BAND button again, and it will beep and flash the  
FM frequency tuning step. If you wish to change the FM  
frequency step, press the TUNING up/down button to select.  
a. If this radio was bought in USA, the FM tuning step selections  
are 100KHz/step and 200KHz/step.  
b. If this radio was bought in Europe, the FM tuning step  
selections are 50KHz/step and 100KHz/step.:  
If you don’t wish to make any change, don’t press the  
TUNING up/down button.  
3. Press the BAND button again, and it will beep and flash the  
AM(MW) frequency tuning step. Press the TUNING up/down  
button to select 9KHz/step or 10KHz/step.  
10kHz/step should be selected when you are in Europe.  
9kHz/step should be selected when you are in USA.  
4. Press the BAND button to complete the setting.  
11  
 
AUX IN socket  
Plug in external audio devices such as CD player to the AUX IN  
socket (on the side of the radio), then play your device and press  
the BAND button repeatedly until you see “AU” on the display.  
The radio will amplify and play out the signal form your device.  
Headphones  
The radio provides a Headphones socket to connect the  
headphones set. When plug in the headphones, the speaker  
is disconnected.  
Display backlight adjustment  
Turn the Display Backlight Adjustment button to adjust the back  
light level.  
Power  
There is a battery back up for 10 minutes which means:  
when the power is unplugged or during a black-out, the clock and  
all the storages will be lost in about 10 minutes.  
GB  
12  
 
Technical data  
Power supply:  
120 Volt/60 Hz (USA version);  
230 Volt/50 Hz (Europe version)/  
ADAPTOR DC OUT 6V/0.5A  
Frequency coverage:  
FM 87.5 – 108.0 MHz  
AM 520 – 1710 kHz (USA version);  
AM 522 – 1629 kHz (Europe version)  
If at any time in the future you should need to dispose of this product please  
note that: Waste electrical products should not be disposed of with household waste.  
Please recycle where facilities exist. Check with your Local Authority or retailer for  
recycling advice. (Waste Electrical and Electronic Equipment Directive)  
13  
 

Rio Audio Portable CD Player SP350 User Guide
Roland Electronic Keyboard AT 350C User Guide
Roland Electronic Keyboard SH 1000 User Guide
Rosewill Network Card RNX G300EXLX User Guide
RTS Network Card DKP 16 CLD User Guide
Samsung Washer P843 User Guide
Sanyo Computer Monitor CE32LM5R User Guide
Sears Lawn Mower 917383223 User Guide
Sears Treadmill NTL190100 User Guide
Sennheiser Headphones 830 S User Guide