Insignia Laptop Docking Station NS MD4U6N User Manual

Quick Setup Guide NS-MD4U6N

4-Port Charging Station

PACKAGE CONTENTS

• 4-Port Charging Station

• AC adapter

USING YOUR CHARGING STATION

1 Plug the AC adapter into the charging station’s power jack and a wall outlet.

2 Connect your devices’USB charging cables into your charging station‘s USB

ports. Make sure that your devices’input speciﬁcations match the USB ports

that you connect them to.

• Quick Setup Guide

FEATURES

Note: See“Features”for information on the USB ports‘ power output.

3 Wrap your cables loosely around the cable organizers (if needed), then thread

them through the openings in the front of your charging station.

• Designed for tablet, phone, MP3, and eReader charging

• Convenient removable cover with integrated stands

• Locations for cable management

AC adapter

Divider

AC wall

outlet

Openings

Cover

4 Place the cover on the base so that the wire holes on the base and cover are

aligned. Your cables should exit the base through the holes. Insert the dividers

into the slots, as needed.

jack

Base

USB outlet

5V / 2.4A (speciﬁed)

USB outlet

5V / 2.0A (total power)

5 Connect your devices to their appropriate power cords, then set them in the

appropriate slots. You can charge four devices at a time.

Note: Check your devices’input speciﬁcation to determine which USB port to connect it

Before using your new product, please read these instructions to prevent any damage.

to. See“Features”for information on the USB ports‘ power output.